info@innov8-group.co.uk Ring us: 0333 335 6375
Not sure which service you need? Ask us, it's free
REQUEST A CALL BACK
innov8 Group
01About 02Services 03Costs 04Projects 05News 06Locations 07Contact INSTANT QUOTE
NEWS · REGULATION · 11 NOVEMBER 2026

HSE confirms the four-stage clearance change: what it means for your next licensed job

By the Innov8 UK Group team ·
HSE has amended Regulation 20 of CAR 2012. From 24 November 2026 the four-stage clearance analyst must be independent of the removal contractor, enforced from November 2027. What changes for clients and what Innov8 already does.
Analyst inspecting a cleaned asbestos enclosure during a four-stage clearance

What is a four-stage clearance (4SC)?

A four-stage clearance is the final safety check after licensed asbestos removal. Before anyone can use the room again, a qualified person called an analyst checks that the asbestos has gone and the area is clean. The analyst does not do the removal. Their only job is to check it.

The check has four steps:

  1. Paperwork and site check. The analyst confirms the job is finished and the work area is still sealed.
  2. Look inside. They go into the sealed work area and check every surface by eye for dust and debris. If they find any, we clean again.
  3. Air test. They test the air inside the work area to make sure it is safe to breathe.
  4. Final check. Once the sealed area has been taken down, they look over the room one last time.

If all four steps pass, the analyst gives you a certificate that says the area is safe to use again. Keep it with your property records. In the rest of this article we call this check the 4SC or "the clearance".

What HSE has announced

Earlier this year we wrote about HSE's consultation on the Control of Asbestos Regulations 2012. On 3 November 2026 HSE published its response, and the headline change is now law: the analyst who carries out the four-stage clearance at the end of licensed asbestos work must be independent of the licensed contractor who did the removal.

Here is what was decided, when it bites, and what it means if you are commissioning licensed asbestos removal in the next twelve months.

What has actually changed

HSE is amending Regulation 20 of CAR 2012, the regulation that covers air testing and site clearance certification. The amendment removes the conflict of interest that arises when the licensed asbestos removal contractor (the LARC) appoints the analyst who then decides whether that contractor's work is clean enough for people to go back in.

The Statutory Instrument has been laid in Parliament and comes into force on 24 November 2026. Industry has a twelve-month transition, and HSE will enforce the change from November 2027.

Two of the three consultation proposals were not taken forward as regulation. HSE will not make UKAS accreditation mandatory for asbestos surveying organisations; it continues to strongly recommend them and is developing further guidance on survey quality. Notifiable non-licensed work (NNLW) stays as a category, with HSE promising clearer guidance on when work falls into it.

HSE will also update the Approved Code of Practice L143 and the Analysts' Guide HSG248 later this year, and has produced simple online guidance to help dutyholders appoint third-party providers.

The consultation ran from 10 November 2025 to 9 January 2026 and drew 358 responses. Seventy-one per cent of respondents supported the independence change.

Air sampling pumps and tubing used for asbestos air testing
Air monitoring pumps on site.

Why HSE did it

HSE's own figures showed the removal contractor appointing the analyst in 53 per cent of site clearances. When the person who signs the certificate of reoccupation is being paid by the person whose work is being checked, and the job is already running late, the pressure is obvious even when everyone is honest. HSE's Director of Engagement and Policy, Rick Brunt, said the organisation is "now able to confidently strengthen asbestos safety regulations".

The industry expects a short-term consequence. Stuart Goodman of Lucion Group has said publicly that he expects a temporary rise in failed clearance assessments as analysts feel less pressure to pass work, and that this would be a sign the change is working. We agree with him.

What it means for clients

If you are a building owner, a housing provider, a main contractor or a CDM client, the practical effect is this:

  1. You appoint the analyst, not us. The clearance analyst will be commissioned independently of the removal contractor. In practice that means the client or dutyholder engages a UKAS-accredited analytical company directly. We can recommend firms we have worked alongside, but the contract and the instruction need to be yours.
  2. Budget for it separately. Clearance and air monitoring will appear as the analyst's invoice to you, not as a line in the removal quotation. Our quotations will say so.
  3. Programme for it properly. A four-stage clearance is a visual inspection, a thorough cleaning check, air testing and a final assessment of the enclosure coming down. It takes the time it takes. Build it into the programme rather than squeezing it into the last afternoon.
  4. Expect the odd fail. An independent analyst who fails an enclosure on the visual stage is doing their job. The contractor re-cleans and the analyst comes back. That is the system working, not a crisis.

What Innov8 already does

We already name the independent UKAS-accredited analyst in our plans of work. From now on that appointment is yours, and we will add the analyst's details to the plan of work once you have confirmed them to us. Nothing about how we set up enclosures, run negative pressure, fine-clean or decontaminate changes, and our licence (242606081) and our notification procedure are unaffected.

If you have licensed work planned between now and November 2027, talk to us before you place the order and we will set out the analyst appointment alongside the removal scope so there is no gap between the two.

Innov8 asbestos enclosure with baglock and airlock in a domestic kitchen
Enclosure with airlock on site.

Read more: four-stage clearance explained · air monitoring and clearance · what is licensed asbestos removal? · the 14-day notification.

What do I need to do now?

  1. Get your proposed work dates from Innov8. Once the scope is agreed we will give you the planned start and finish dates for the removal and the day the clearance will be needed.
  2. Contact your local UKAS-accredited analytical company. If you do not already use one, Innov8 can put you in touch with companies that provide clearance and air testing throughout the UK.
  3. Book the clearance for the pre-arranged dates.
  4. If those dates are not available, liaise with Innov8 and we will agree new dates with you before the notification goes in.
  5. Check the analyst's payment terms. Some companies ask for payment up front or on completion of the clearance; commercial clients may be offered credit terms on this service.
Questions about any of this? Contact us or call 0333 335 6375.
Cover of the UKAS asbestos analytical companies regional directory
FREE DOWNLOAD · PDF

Find a UKAS-accredited asbestos analyst near you

UKAS is the United Kingdom Accreditation Service, the national body that assesses laboratories and inspection bodies against recognised standards. Asbestos air testing and four-stage clearance must be carried out by a company holding UKAS accreditation for that work.

Our regional directory lists 191 analytical companies across the UK, with phone, email, office address, website and UKAS number, so you can appoint your own clearance analyst.

DOWNLOAD THE DIRECTORY (PDF)
Compiled 11 November 2026. Accreditations change: check the company's current schedule at ukas.com before you appoint. Innov8 lists these companies for information and does not recommend or guarantee any of them.
RELATED:CAR 2012 proposed changes →  ·  HSE control limit review →  ·  Licensed, notifiable and non-licensed work →
CONTACT US

Talk to a specialist today

CALL US NOW
0333 335 6375
Mon to Fri 8am to 6pm · Emergencies day & night
Tap to call →
EMAIL US
info@innov8-group.co.uk
Attach photos for a faster quote
Send an email →
CALL BACK
We ring you back the same working day
Leave your number, we do the chasing
Arrange a call →
QUOTATION FORM
Quotation usually within 24 hours for straightforward enquiries
Send the details and photos
Start your quote →
Innov8 Group
HSE-licensed asbestos removal and environmental contractor. Surveys, removal, demolition, remediation and hazardous waste — One contractor coordinating the work from survey through to completion. Based in Manchester, with locations in Carlisle and London, working across the UK.
Follow us on social media
PAGES
About usServicesCostsProjectsNewsLocationsAccreditationsFAQsSurvey analyserContact
SECTORS
HomeownersLandlordsHousing associationsSchoolsHealthcareMain contractorsIndustrialRetail & officesPublic sectorDevelopers & land remediation
CONTACT
0333 335 6375 info@innov8-group.co.uk Unit 7, Wilsons Business Park Centre, Manchester M40 8WN
website by pixelmonster
5-star rated by our customers
5-star rated on Trustpilot reviews
5-star rated on Yell business reviews
Verified reviews across the web
Trustindex© 2026 Innov8 UK Group Ltd. All rights reserved.  ·  Privacy  ·  Cookies
website by pixelmonster